[Trung_hit]

em có 1 trường hợp này ko biết giải quyết ra sao mọi người giúp em nhá:

Em có 1 con máy desktop, main giga8Ik1100 ver2 , card hình 128 Albatron Fx5200, và 2 thanh Ram 512 loại noname ...ah ah hết bảo hành rùi nhá :P
Bình thường thì máy chạy ngon lành cành đào, hôm trước đẹp trời em vác ra cài Vista thì thấy nó thinh thoang dump Ram khoang 2tuan 3 tuan 1 lan. Nhưng đến lần thứ 3 4 gì đó thì em không chịu được mang ra cài lại Xp và làm vệ sinh máy. sau khi lắp lại OK thì máy ko chạy được nữa, cứ cài dc
phần nhỏ thì hiện lên mành hinh xanh, em cung thay thử 2 con RAM lom khác và cung bi tinh trang như thế

ai giúp em với ???

THANKS

[churanluoi]

chắc o chịu khử tĩnh điện mà đã rờ vào bên trong máy nó mới bị khìn khìn

[Trung_hit]

ai trả lời hộ em vụ này với
rất chi là ức chế :(

em mang máy lên trananh thì nó test nó kêu RAM hỏng, trong khi em co tất cả 4 con RAM đủ thể loại và đều bị thế, không lẽ RAM của em hỏng hết .
em bảo bọn nó thế thì bọn nó kêu thế thì chịu rồi trả lại máy :@

[Trung_hit]

up up up
ai giúp em với !!!

[Trung_hit]

up !!!!!! up up up
@; up thôi em ko spam đâu :(

[khinhvuphiduong]

Có lần cũng bị khởi động là treo, màn hình không nên. Gỡ hết ra để vài ngày, ráp lại Chạy ngon. Thử ráp lại xem có khi trong khi lắp lỗi gì đấy dẫn đến xung phần cứng.

[tranthehien]

Originally Posted by Trung_hit

ai trả lời hộ em vụ này với
rất chi là ức chế :(

em mang máy lên trananh thì nó test nó kêu RAM hỏng, trong khi em co tất cả 4 con RAM đủ thể loại và đều bị thế, không lẽ RAM của em hỏng hết .
em bảo bọn nó thế thì bọn nó kêu thế thì chịu rồi trả lại máy :@

sao bác không thử để một cây ram chạy xem sao?
bác thử từng cay ram và từng khe cắm ram xem có bị như vậy nữa kh?
bác có vệ sinh mấy khe ram kh? sợ dính bụi trong đó nó lỗi ...
thữ xem thay pin cmos mới xem...
mình làm từng trường hợp cụ thể rùi mới biết dược thằng nào bị điên chứ...phương pháp loại suy----->>>>

[Trung_hit]

báo cáo là có 2 máy đều chạy ngon
1 con AMD a Intel nên ko tự test main chip dc
Còn lài card màn hình, RAM, HDD, Pin .... em dều thử rồi mà
nghi nghi con main mà thằng Trần Anh nó kêu RAM :@ , trong khi nói rõ là có 3 con Ram thay luân phiên rồi

[Trung_hit]

http://img406.imageshack.us/img406/7800/dsc01147qw0.jpg


đây là cái thông báo của nó các bác giúp em với , còn máy kiểu nữa nhung chu yếu là cái này :(

[Trung_hit]

The system attempted to access pageable memory using a kernel process IRQL that was too high. Drivers that have used improper addresses typically cause this error.
Stop 0x000000D1 Error Message When You Turn Your Computer Off
When you shut down your computer that has one or more universal serial bus (USB) devices attached to it, you may receive the following error message on a blue screen:

Stop 0x000000D1 (0x00000040, 0x00000002, 0x00000000, 0xfc96a9dc)

"STOP 0x000000D1 IRQL_NOT_LESS_OR_EQUAL Kbdclass.sys" Error Message When You Try to Shut Down the Computer
When you try to shut down your computer, you may receive a STOP error message on a blue screen that is similar to the following:

STOP 0x000000D1, (0x0000002b, 0x00000002, 0x00000000, 0xEEEE1b01) IRQL_NOT_LESS_OR_EQUAL Kbdclass.sys.

After you receive this error message, the computer restarts.

You receive a "STOP 0x000000D1" error message on your Windows XP Service Pack 2-based portable computer
When you switch your Microsoft Windows XP Service Pack 2 (SP2)-based portable computer from AC (utility) power to DC (battery) power, or vice versa, you may receive a Stop error message that is similar to the following:

STOP 0x000000D1 (0x0000000C, 0x00000002, 0x00000000, 0xF8E26A89) gv3.sys – Address F8E26A89 base at F8E26000, Datestamp 3dd991eb

This problem may also occur at other times, depending on how your system was designed.

WRQ AtGuard Program Causes Error Message in Windows XP
You may receive the following error message on a blue screen on your Windows XP-based computer with the WRQ AtGuard firewall program installed:

STOP: 0x000000D1 (0x0200000c, 0x00000002, 0x00000000, 0xf617c2c6) DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

You receive a "Stop: 0x000000D1" error message after you establish a VPN connection
After you establish a virtual private network (VPN) connection, your computer stops responding unexpectedly. You receive the following Stop error message:

STOP: 0x000000D1 (0x00000020, 0x00000002, 0x00000000, 0xf5bf0f68)

Adding a Second Mylex AcceleRAID SCSI Controller Causes an Error Message
If you add a second Mylex AcceleRAID controller to a Windows XP-based computer, you receive the following error message on a blue screen after the Found New Hardware Wizard starts:

STOP 0x000000D1 (0xf8a5802c, 0x00000006, 0x00000000, 0xf847f8a4) DRIVER_IRQL_NOT_LESS_OR_EQUAL.

When you receive this error message, the computer stops responding (hangs).

The BLACKDRV.SYS file Causes the Stop Error Message: 0X000000D1(0XBE70D600, 0X00000000,0X00000000,0XBE92F13C)
When you copy large files over the network, your computer can restart if Startup And Recovery is set to Automatically Reboot under the System Properties Advanced tab. Otherwise, your computer may generate the following STOP error message:

Stop 0X000000D1 (0XBE70D600, 0X00000000,0X00000000,0XBE92F13C) DRIVER_IRQL_NOT_LESS_OR_EQUAL. Address BE92F13C Base at BE92C000, date Stamp 394006612 BLACKDRV.SYS

You receive a "Stop 0x000000D1" Stop error message when you back up data to a tape device on a computer that is running Windows Server 2003, Windows XP, or Windows 2000
When you back up data to a tape device on a computer that has a MegaRAID controller and that is running Microsoft Windows Server 2003, Microsoft Windows XP, or Microsoft Windows 2000, you receive a Stop error message that is similar to the following:

Stop 0x000000D1 (parameter1, parameter2, parameter3, parameter4) Scsiport.sys

You occasionally receive a "STOP: 0x000000D1" error message when your Windows XP Service Pack 2-based computer resumes from standby
When your computer resumes from standby, you occasionally receive the following Stop error message: A problem has been detected and Windows has been shut down to prevent damage to your computer... Technical information:

*** STOP: 0x000000D1 (0x0000000C, 0x00000002, 0x00000001, 0xF96C49ED) DRIVER_IRQL_NOT_LESS_OR_EQUAL

You occasionally receive a "STOP 0x000000D1" error message when you start or shut down a Windows XP-based computer or a Windows Server 2003-based computer
When you start or shut down a Microsoft Windows XP-based computer or a Microsoft Windows Server 2003-based computer, you may occasionally receive a Stop error message that is similar to the following:

A problem has been detected and Windows has been shut down to prevent damage to your computer... STOP 0x000000D1 (0x00000000, 0x00000002, 0x00000001, 0xf7167161) DRIVER_IRQL_NOT_LESS_OR_EQUAL

"STOP:0xD1" Error Message When You Start Your Windows XP-Based Computer
When you start your computer, you may receive the following error message:

STOP:0xD1 (DRIVER_IRQL_NOT_LESS_OR_EQUAL)

Error Message Appears When You Start Laplink PCsync Version 2.0 on Windows XP
After you install Laplink PCsync version 2.0 and specify the USB transfer software, when you try to start the PCsync program, the computer displays the following error message and then spontaneously restarts:

*** Fatal System Error: 0x000000d1 (0x0000000A,0x00000002,0x00000000,0xFC37664A) Break instruction exception - code 80000003 (first chance) A fatal system error has occurred.

You receive a STOP 0xD1 error message when you start your Windows XP-based computer
When you start your Microsoft Windows XP-based computer you may receive the following Stop error message after the Windows XP splash screen appears:

Stop 0x000000D1 (0x0000001c, 0x00000002, 0x00000000, 0xf75ba58e) DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses.

You receive a "Stop 0xD1" error message when you try to establish a TCP/IP session
When you try to establish a TCP/IP session, your computer may stop responding, and you may receive a "Stop 0xD1" error message.

You receive a "STOP: 0x000000D1" error message on a computer that is running Windows XP with Service Pack 1 or Windows XP with Service Pack 2
You are using a computer that is running Microsoft Windows XP with Service Pack 1 (SP1) or Windows XP with Service Pack 2 (SP2); A program on the computer tries to connect to a Loopback adaptor IP address other than 127.0.0.1. For example, the program may try to connect to IP address 127.0.0.2. When the program tries to connect to the IP address, you may receive the following error message for the Tcpip.sys driver:

STOP: 0x000000D1 (DRIVER_IRQL_NOT_LESS_OR_EQUAL )

Error Message with RAM Problems or Damaged Virtual Memory Manager
When your computer restarts after you install Windows XP Home Edition, you may receive either of the following error messages: System has recovered from a serious error DRIVER_IRQL_NOT_LESS_OR_EQUAL

You may receive a Stop error message after you insert media into a removable disk device in Windows XP, Windows Server 2003, or Windows 2000
You may receive a Stop error message after you insert media into a removable disk device that is connected to a computer that is running one of the following operating systems: Microsoft Windows Server 2003; Microsoft Windows XP; Microsoft Windows 2000 Professional. The message may also occur if you start the computer when a removable disk device that contains media is connected to the computer.

The Stop error message is similar to one of the following messages:

STOP 0x0000000A (0x00000004, 0x0000001c, 0x00000001, 0x804324ac)

STOP 0x000000D1 (0xffffff20, 0x00000002,0x00000000, 0xbfe5d810)

STOP 0x000000C4 (0x00000013, 0x00000fb6, 0x88efb2c0, 0x00000000)

STOP 0x00000050 (0xff391000, 0x00000001, 0x804d1017, 0x00000000).

Note The parameters for these Stop error messages may vary.




loi~ nao` nhi ????