vozForums
Về việc các vấn đề gần đây xoay quanh vụ Trung Quốc

Go Back   vozForums > Sản phẩm công nghệ > Multimedia


Reply
 
Thread Tools
  #1  
Old 26-05-2008, 17:15
nhmols's Avatar
nhmols nhmols is offline
Senior Member
 
Join Date: 07-2006
Posts: 4,714
Cách fix lỗi không support SPDIF-in decode cho XFI trên Vista

Cái này NHMOLS sưu tầm được nhưng chưa có test nha. Tối nay mới về test được á.

Quote:
Compiled on Feb 13 2008 by Daniel Kawakami
Quote:
Supports both 32-bit and 64-bit versions of Vista (including Service Pack 1)
Quote:
Supports all X-Fi cards with a Hardware CA20K DSP chipset (OEM / Retail models)

Does NOT support the following OEM / Retail models:

- Host / software-based cards including X-Fi Xtreme Audio PCI and PCI-E
- any external X-Fi soundcards
Quote:
This setup program will install the following items:

- Audigy series driver 2.15.0004.4
- APO Interface Module 1.30.00
- Audio Console 2.50.10
- MediaSource DVD-Audio Player 2.00.76
- SoundFont Bank Manager 3.20.20

Exclusive features in this unofficial driver:

- Dolby/DTS decoder (working on 32-bit/64-bit, requires Windows Vista Service Pack 1)
- DVD Audio (32-bit only)
- Hardware MIDI synthesizer (includes 2Mb, 4Mb and 8Mb SoundFont banks)

Release notes / Known issues:

- Windows Security warning during driver installation
When prompted with “Windows can’t verify the publisher of this driver software”, choose “Install this driver software anyway”.

- WaveRT Pull Mode enabled by default
Does not seem to cause any problems, but if you ever need to disable it, follow these steps:

* run the Registry Editor (Regedit) and open the following registry tree:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class
* Select Search (or press the F3 key) and type EnableWaveRTPullMode, deleting the value when found.
* Restart the computer. Restart the computer.
Quote:
- Built-in Decoder (Built-in Decoder (requires Windows Vista Service Pack 1)
To use the built-in decoder, make sure it is enabled in Audio Console.

Select “SPDIF Out (Creative SB Audigy (WDM))” as the output device of Select “SPDIF Out (Creative SB Audigy (WDM))” as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
When you restart your computer, the Tone settings (Bass and Treble) may not be applied. Just readjust one of the controls one time per boot.

- Windows Vista MIDI Device Configuration Utility
Use this utility to change the MIDI playback device for 32-bit and 64-bit applications.
The driver installer automatically selects the first hardware MIDI synthesizer found.
Link Rapidshare:
Link Mediafire:
Source: http://nomoregoatsoup.wordpress.com/...lb_2_15_0004a/

Last edited by nhmols; 26-05-2008 at 17:25.
Reply With Quote
  #2  
Old 26-05-2008, 17:31
nhmols's Avatar
nhmols nhmols is offline
Senior Member
 
Join Date: 07-2006
Posts: 4,714
Re: Cách fix lỗi không support SPDIF-in decode cho XFI trên Vista

Trong trang web này còn có cách tạo thêm cái Crystalizer cho dòng Audigy nữa nè:

Quote:
Warning: This software is unofficial, not supported by Creative Technology Ltd.

Use it at your own risk.
Quote:
X-Fi Crystalizer for Creative SB Audigy series 1.2.0.0 - by Daniel Kawakami
Quote:
WARNING: Use this utility at your own risk, without any guaranties.

This small utility will unlock X-Fi Crystalizer on any Audigy card, except the Audigy SE/Value/LS.

It requires Windows running in Safe Mode.
Quote:
How to use:

1) Install the unofficial “SB Audigy Series Installation Disc for Windows XP/Vista” (new version, unreleased) or “SB Audigy series Vista Support Pack” from Daniel Kawakami (daniel_k).

Restart Windows to complete the driver installation.

2) Restart Windows in Safe Mode.

Install the X-Fi Console, then run CrystalizerUnlocker.

Restart Windows in Normal Mode.

3) Open the X-Fi Console and enjoy!

IMPORTANT NOTES:

This is a software (host-based) implementation of Crystalizer

CMSS in Audio Console/EAX Settings only works with OpenAL/ALchemy

These utilities configure CMSS in hardware mode, that requires OpenAL or ALchemy. Disable CMSS to avoid conflicts with X-Fi CMSS-3D.

In software mode, used by Windows Vista, use the X-Fi Console to enable X-Fi CMSS-3D.

X-Fi Console

Provides the following audio enhancements:

- EAX effects
- X-Fi CMSS-3D
- X-Fi Crystalizer

These enhancements only work with the Windows Vista audio system, that uses software processing and don’t work with OpenAL and ALchemy.

When using X-Fi CMSS-3D, disable CMSS in Audio Console/EAX Settings to avoid conflicts.

*** There were some bugs in the previous version.

*** To install this new version, you must remove everything, including the driver, applications, “Creative” folders in “Program Files” and all registry entries.

The X-Fi Console is just the “X-Fi Audio Console” renamed to co-exist with the Audigy Audio Console and the unnecessary tabs were removed.

Without the CrystalizerUnlocker, it does nothing, so it was not “cracked”.
Crystalizer Unlocker:
http://files.filefront.com//;10214395;/

X-Fi Console 2.50.11
http://files.filefront.com//;10253718;/
Reply With Quote
  #3  
Old 27-05-2008, 11:57
nhmols's Avatar
nhmols nhmols is offline
Senior Member
 
Join Date: 07-2006
Posts: 4,714
Re: Cách fix lỗi không support SPDIF-in decode cho XFI trên Vista

sorry anh em. cái này NHMOLS mới test xong, tình hình là nó chẳng cho cài. nó báo "không tìm thấy supported product" nên chăng biết làm sao cài tiếp lun.
Reply With Quote
  #4  
Old 27-05-2008, 16:16
titi's Avatar
titi titi is offline
Senior Member
 
Join Date: 02-2008
Posts: 533
Re: Cách fix lỗi không support SPDIF-in decode cho XFI trên Vista

Cũng đang định tối nay cài thử thế nào, hy vọng là nó sửa thêm vài cái bug trên 64bit.
Reply With Quote
  #5  
Old 27-05-2008, 22:47
titi's Avatar
titi titi is offline
Senior Member
 
Join Date: 02-2008
Posts: 533
Re: Cách fix lỗi không support SPDIF-in decode cho XFI trên Vista

Đã cài bản driver không chính thức này, cuối cùng thì cũng đã chạy được rất ok và đã xuất ra được tín hiệu Dolby/DTS decoder trong CyberLink PowerDVD 8 Ultra, chạy trên win vista nhé...
Reply With Quote
  #6  
Old 28-05-2008, 20:03
thinhint's Avatar
thinhint thinhint is offline
Senior Member
 
Join Date: 03-2007
Location: Italia
Posts: 1,512
Send a message via Yahoo to thinhint
Re: Cách fix lỗi không support SPDIF-in decode cho XFI trên Vista

Cảnh báo anh em, nên BACKUP hệ thống trước khi cài đặt, nếu ko sẽ phải ân hận

Last edited by thinhint; 28-05-2008 at 21:05.
Reply With Quote
  #7  
Old 29-05-2008, 07:28
nhmols's Avatar
nhmols nhmols is offline
Senior Member
 
Join Date: 07-2006
Posts: 4,714
Re: Cách fix lỗi không support SPDIF-in decode cho XFI trên Vista

Chính xác. NHMOLS cài xong ... hết BOOT vào máy luôn. Phải system restore lại. Tình hình là chút nữa về làm lại thui. Steps như sau:

1. Remove toàn bộ driver và soft cũ của XFI.
2. Cài cái driver mod trước
3. Cài thêm bộ soft mới.
Reply With Quote
  #8  
Old 29-05-2008, 15:12
nhmols's Avatar
nhmols nhmols is offline
Senior Member
 
Join Date: 07-2006
Posts: 4,714
Re: Cách fix lỗi không support SPDIF-in decode cho XFI trên Vista

thui thua rùi, thử đủ trò, remove sạch, cài new lung tung nhưng vẫn pó tay với em SPDIF-in decode rùi.
Reply With Quote
  #9  
Old 01-06-2008, 10:04
kingtea's Avatar
kingtea kingtea is offline
Senior Moderator
 
Join Date: 03-2007
Location: Where of Nowhere
Posts: 1,823
Send a message via Yahoo to kingtea
Re: Cách fix lỗi không support SPDIF-in decode cho XFI trên Vista

Muốn cài được làm ơn tìm cái Guru3D - Driver Sweeper về cài vào dùng nó tháo sạch sẽ Driver của Creative rồi cài vào cha! Lý do X-Fi được Vista tự nhận với cái driver từ creative nên khi cài cái bản mod này vào nó sẽ không tìm được đồng loại của nó, nó không nhận được phần cứng do lúc nào Vista cũng chắc chắn khẳng định với nó đây là X-Fi chính hãng và tao có driver rồi. Cứ Dùng em Guru3D - Driver Sweeper remove sạch sẽ hết và. Test tự test và tự sướng đi nhé

Load em trên ở đây này
http://downloads.guru3d.com/download.php?det=1655
link thông tin về em nó
http://www.guru3d.com/index.php?page=driversweeper
Reply With Quote
  #10  
Old 01-06-2008, 11:39
thinhint's Avatar
thinhint thinhint is offline
Senior Member
 
Join Date: 03-2007
Location: Italia
Posts: 1,512
Send a message via Yahoo to thinhint
Re: Cách fix lỗi không support SPDIF-in decode cho XFI trên Vista

Có cài mới WIN hoàn toàn thì DRIVER MOD này cũng ko ăn thua đâu! Đừng cố gắng TEST làm gì
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





All times are GMT +7. The time now is 01:00.


Steam Powered by vBulletin® 0.1 pre-alpha
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.