vozForums
Về việc các vấn đề gần đây xoay quanh vụ Trung Quốc

Go Back   vozForums > Máy tính để bàn > Phần cứng chung


Reply
 
Thread Tools
  #1  
Old 27-03-2012, 08:34
tangyind tangyind is offline
Junior Member
 
Join Date: 09-2011
Location: http://www.lcd-inverter-shop.net/Toshiba/Toshiba_3.html
Posts: 1
LCD display boot no power failure

LCD display boot no power failure LCD monitors turn the power switch, power indicator light failure. LCD monitor to boot without a power failure is generally due to the power cord is bad or the power circuit components, Acer Aspire 6530G Inverter damaged.

When the computer LCD monitor is turned on when a power failure, maintenance can be carried out in accordance with the following method:

(1) First check the LCD monitor's power cord is plugged in tight, and check the power strip has power.

(2) If the power cord is fully seated, electric power strip, then open the casing of the LCD monitor, check the LCD display, whether obvious burned components and poor contact situation, if there is, first replace the burned components and exclude poor contact failure.

(3) If there is no obvious burned components and poor contact failure, then failure to test the power supply circuit (first detect whether the main components, and then one by one to detect the power supply circuit, other components of the Compaq Presario CQ61-410US Inverter), found that The power supply circuit, a capacitor, the replacement of normal LCD monitor, troubleshooting.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





All times are GMT +7. The time now is 08:13.


Steam Powered by vBulletin® 0.1 pre-alpha
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.